Thursday, February 28, 2013

Frostbike 2013: Part 4

Skinwalls!
Sunday was the closing day for Frostbike and I awoke at Ben's home to get ready. We then peeled out to his folks place for poached eggs and toast with some fresh coffee on top and then we hit the road northward.

I didn't have a whole lot on the agenda. A few things that I needed to hit up, then I just needed to wait until 2pm for a meeting with a Salsa rep concerning the shop. The pre-order for 2014 was on the agenda. My boss from the shop was supposed to show up for it.

Interestingly, there was a good, long conversation in the Challenge Tire booth with their rep and a person very high up in the chain of command at QBP. The overall feeling I got was that gravel road and fat bike segments were very high in focus and priority with QBP. It doesn't take much to see that is true when you check out some of Q's brands and how they have refocused over the past few years.

Salsa Cycles threw out that Mukluk in late 2010 and when the bike sold out, they brought a three bike line up the following year. 2013 saw the addition of a full on race bike in the Beargrease, and I thought that was pushing the limits. Nope! Now for 2014 we're going to see a high technology, super-fat bike in the Carbon Beargrease. Amazing! Add in those Warbird gravel road racers, the Vaya, and you can see a focus on those categories quite easily.

The new All City Macho Man Disc gravel/cross rig.
Another brand, this one switched up to cover cross and gravel riders, is All City. I remember when that brand was just Jeff Frane and a bunch of fixie-hipster componentry.

All City then branched out to offer urban bashers and fixed gear frame sets. But then one day this single speed cross bike appeared called the Nature Boy. It was touted as a cross rig, which it is, but gravel riders were attracted to it in significant numbers.

Then came the Mr. Pink all-road bike, then the Spacehorse, which really hit the gravel riders as a good rig, and then the geared version of the Nature Boy, the Macho Man appeared. Now when you walk into an All City booth at a show, it's hard to find a fixed gear selection. Sure, they have one hanging on in the line, and a couple of frame sets, but this brand has gone completely in another direction. Gravel and cross. The all new Macho Man Disc will only further that feeling.

So gravel and fat bikes are certainly where the action is at with the Q brands. Foundry, the oddly named carbon bike brand, is all cyclo-cross, for the most part. There is a token 29"er there, but whoop-de-doo. It, (and the other Foundry bikes),  looks like an overpriced refugee from a Chinese manufacturers catalog. Surly? Well certainly they are, (pardon the pun), the odd man out, but with the seminal Cross Check, and two very popular fat bikes, they have their bases covered already. Add in the 29+ Krampus, and you just may have a whole nuther segment created right there. Surly may be "anti-establishment", but they can't be blamed for not being at the front end of most of these niche cycling categories. Cutting edge misfits, those fellers!

Gravel grinding: It's the new black...
Well, I had all those conversations at one point or another during the weekend that I can tell you about. However; there was more. A lot more that I can not speak of......yet. But mark my words here- fat bikes are being fast tracked and what you see now will be prehistoric in terms of tech and performance in three years tops. I know gravel grinding stuff may see the same treatment. Fat bikes will be first though. It's going to be super exciting to see how it all comes down.

After jawing all that time, a guy can work up quite an appetite. Fortunately Jeff Kerkove put a bug in my ear to go to lunch with  him. We caught up on things and had a great time.  For those who haven't been along here for the entire ride, Jeff used to work at the shop with me and was the co-founder of Trans Iowa. Now he's with Ergon, and riding bikes all over the place. We get to see each other very rarely, so it was good to sit down with him.

And that meeting I was supposed to have at 2pm? Well, my boss changed the timing but neglected to inform me of that small detail. So I found out at 2pm that Ben and I could have been gone already, and my wife could have seen all of the Academy Award ceremony, and....... Meh!.......

Communication........it is sort of important. 

So Frostbike came to an end for 2013. It was a whirlwind of a weekend and I had a lot of fun. Seeing many people I don't get to see very often, and meeting new folks too was certainly the highlight of the time spent there. Bikes were the added icing on that cake.

Thanks! I wanted to give special shouts out to: Ben and Meg, the Witt family, Mike's Bikes: Mike, Stuart, and Jon- Salsa Cycles: Mike Riemer, Tim K, John Gaddo, Aaron Stehly- QBP: Jason Boucher, Mary, and all the staff- The Vendors: Jeff Kerkove, Morgan Nicol, Chris Clinton, Donn Kelogg, Matt Ruiter, and all the good folks there to show their wares. Friends old and new, and everyone that made the weekend what it was. Thanks!

Frostbike 2013: Part 4

Skinwalls!
Sunday was the closing day for Frostbike and I awoke at Ben's home to get ready. We then peeled out to his folks place for poached eggs and toast with some fresh coffee on top and then we hit the road northward.

I didn't have a whole lot on the agenda. A few things that I needed to hit up, then I just needed to wait until 2pm for a meeting with a Salsa rep concerning the shop. The pre-order for 2014 was on the agenda. My boss from the shop was supposed to show up for it.

Interestingly, there was a good, long conversation in the Challenge Tire booth with their rep and a person very high up in the chain of command at QBP. The overall feeling I got was that gravel road and fat bike segments were very high in focus and priority with QBP. It doesn't take much to see that is true when you check out some of Q's brands and how they have refocused over the past few years.

Salsa Cycles threw out that Mukluk in late 2010 and when the bike sold out, they brought a three bike line up the following year. 2013 saw the addition of a full on race bike in the Beargrease, and I thought that was pushing the limits. Nope! Now for 2014 we're going to see a high technology, super-fat bike in the Carbon Beargrease. Amazing! Add in those Warbird gravel road racers, the Vaya, and you can see a focus on those categories quite easily.

The new All City Macho Man Disc gravel/cross rig.
Another brand, this one switched up to cover cross and gravel riders, is All City. I remember when that brand was just Jeff Frane and a bunch of fixie-hipster componentry.

All City then branched out to offer urban bashers and fixed gear frame sets. But then one day this single speed cross bike appeared called the Nature Boy. It was touted as a cross rig, which it is, but gravel riders were attracted to it in significant numbers.

Then came the Mr. Pink all-road bike, then the Spacehorse, which really hit the gravel riders as a good rig, and then the geared version of the Nature Boy, the Macho Man appeared. Now when you walk into an All City booth at a show, it's hard to find a fixed gear selection. Sure, they have one hanging on in the line, and a couple of frame sets, but this brand has gone completely in another direction. Gravel and cross. The all new Macho Man Disc will only further that feeling.

So gravel and fat bikes are certainly where the action is at with the Q brands. Foundry, the oddly named carbon bike brand, is all cyclo-cross, for the most part. There is a token 29"er there, but whoop-de-doo. It, (and the other Foundry bikes),  looks like an overpriced refugee from a Chinese manufacturers catalog. Surly? Well certainly they are, (pardon the pun), the odd man out, but with the seminal Cross Check, and two very popular fat bikes, they have their bases covered already. Add in the 29+ Krampus, and you just may have a whole nuther segment created right there. Surly may be "anti-establishment", but they can't be blamed for not being at the front end of most of these niche cycling categories. Cutting edge misfits, those fellers!

Gravel grinding: It's the new black...
Well, I had all those conversations at one point or another during the weekend that I can tell you about. However; there was more. A lot more that I can not speak of......yet. But mark my words here- fat bikes are being fast tracked and what you see now will be prehistoric in terms of tech and performance in three years tops. I know gravel grinding stuff may see the same treatment. Fat bikes will be first though. It's going to be super exciting to see how it all comes down.

After jawing all that time, a guy can work up quite an appetite. Fortunately Jeff Kerkove put a bug in my ear to go to lunch with  him. We caught up on things and had a great time.  For those who haven't been along here for the entire ride, Jeff used to work at the shop with me and was the co-founder of Trans Iowa. Now he's with Ergon, and riding bikes all over the place. We get to see each other very rarely, so it was good to sit down with him.

And that meeting I was supposed to have at 2pm? Well, my boss changed the timing but neglected to inform me of that small detail. So I found out at 2pm that Ben and I could have been gone already, and my wife could have seen all of the Academy Award ceremony, and....... Meh!.......

Communication........it is sort of important. 

So Frostbike came to an end for 2013. It was a whirlwind of a weekend and I had a lot of fun. Seeing many people I don't get to see very often, and meeting new folks too was certainly the highlight of the time spent there. Bikes were the added icing on that cake.

Thanks! I wanted to give special shouts out to: Ben and Meg, the Witt family, Mike's Bikes: Mike, Stuart, and Jon- Salsa Cycles: Mike Riemer, Tim K, John Gaddo, Aaron Stehly- QBP: Jason Boucher, Mary, and all the staff- The Vendors: Jeff Kerkove, Morgan Nicol, Chris Clinton, Donn Kelogg, Matt Ruiter, and all the good folks there to show their wares. Friends old and new, and everyone that made the weekend what it was. Thanks!

Wednesday, February 27, 2013

Frostbike 2013: Part 3

No- You can not buy one like this from Surly.
With Friday behind us, Ben and I woke up early and hit "The Tavern" in downtown Northfield for some eggs and bacon. Then it was on to "Goodbye Blue Mondays" for our cuppa joe to go, and off we went to QBP's massive warehouse for the Frostbike show.

When I got there I headed over to Salsa's booth and saw the prototype tandem 29"er, which was pretty awesome. Then after a bit of chatting with the Salsa folk, I moved onward to check out the other booths. It quickly became apparent that besides fat bike stuff, gravel road talk was high on several folks minds.

I spent a long time talking with Clement's Donn Kellogg. The gravel scene is really drawing manufacturers in, and I also learned from sources at the show that major players are taking notice. It will be interesting to see how the genre' is interpreted by more corporate entities. 

These new bags for the Big Dummy are super-rad.
I talked so much to so many folks on Saturday, in fact, that I missed lunch altogether. The afternoon wore on and it ended up with me hanging around the Salsa area with Ben and Curtis. A small crowd was gathering near by for SRAM's XX-1 giveaway. I noticed Hurl Everstone of One On One Studio and Cars Are Coffins fame talking with Greg Herbold, former downhill champ and current SRAM spokesperson. H-Ball was holding a koozie with a Keystone beer in it. He was telling a great story about a taxi ride with two foreign drivers in the same taxi. (You had to be there.)

Before long H-Ball was getting into "show mode" to give away the XX-1 group. Ben said he was going to run over to see who might win it, while Curtis and I stayed clear and chatted with some other folks.

Suddenly Ben was shouting Curtis' name and I realized Curtis won. Curtis' face was in disbelief as he walked over and received the voucher for a complete XX-1 group. A bit later, he almost traded it to Salsa's Kid Riemer for a Buick, but that didn't quite happen.

Then there was this shindig going on upstairs, but only for certain dealers. I was wearing my media tag. An old friend of mine that works at Q whisked me right in though, and the next thing ya know, I am up in the Salsa Cycles cubicle area quaffing beers and gabbing with the fellas. Here is where I started to figure out that I needed re-fueling. It had been since early morning that I had eaten, and I was getting kind of weird feeling in the head. No wonder! About this time, a bag of cheese curds appeared and saved me from utter collapse.

The deal was that there would be a dinner provided by QBP at 7pm and all I had to do was hang on a bit longer.

Nickle, (facing), and Ben on our way to the Cutter's Ball
Well, finally the word came that it was time, so we all filtered down to the cafeteria and grabbed a plate. Once we got through the line, we found that the room was filled and not many open seats were available. So we had a former QBP employee in the group who knew the building well. He directed us to a nearby conference room where we squatted and ate our meals without further adieu.

Once the grub had been grubbed, we made way to the show floor where there was karaoke and folks milling about. I somehow had gotten separated from Ben and Curtis during this time, so I wandered over to the shadow box displays where the QBP brands each display a bicycle or product. I stopped at the All City booth, where there was a Nature Boy or some model of theirs surrounded by Pabst Blue Ribbon cans. I noticed the pull tabs were still in the cans, but I figured the cans must have been drained. I casually kicked at one nearest to me and it was full! 

With one less can in the display, I walked down back to the crowd and found Ben and Curtis with a few others. We hung around a bit longer before Ben made the announcement that we were leaving for the Cutter's Ball. This is an event that has been taking place for the last four years. I'm not sure it is a benefit, but the event features some facet or entity in the Twin Cities bicycle culture, and this time it was all the way downtown.

Chad Ament, (L) and Tobie Depauw of NC Cyclery @ One On One
Well, this Cutter's Ball was all about Handsome Cycles moving in next door to One On One Bicycle Studio. So we had to ply the busy streets of downtown Minneapolis. Ben was driving, and while he has several amazing talents, being calm in the face of urban driving madness is not one of them. In a bit of frustration, he whipped the car into some random parking garage and parked the car. We had a passenger, Nickle, (yes- his real name), and we went in search of One On One Bicycle Studio.

We wandered in the general direction and eventually found the place after going about 8 blocks or so. Not bad, actually, and the "people watching" opportunities were vast and varied. The area is known for its clubs and younginz all dressed up were walking up and down the streets trying to search for that certain "sumpthin-sumpthin" that younginz often are in search of.

Once inside Ben and Curtis walked off with Nickle into the party. Me? I never got more than 20 feet inside the front door because there were so many folks that wanted to chat with me. Interesting conversations were had, and time was not on my mind. In fact, I have no clear idea what time it was during most of what I am writing about here. I was not at all worried about time. It was rather pleasant, actually.

Urban Adventurers
Well, we had to go home at some point, and once again, it was Ben who made the motion to head out. We picked up three more guys who needed rides back to their hotel. The crew, now six of us, took off in the general direction of the mystery parking garage that, by now, none of us had any clear idea about its specific location or the street it was on for sure. Ben proffered his ticket, taken upon our entrance, and GPS'ed the address and we were on a bead for the location until I misguided us about a block too far South.

Along our route, there were perhaps even more revelers than before when we came the other way. Dance club music filtered out of double doors guarded by twin security men up and down the streets. Lights flickered in the cold, somewhat foggy air. Girls with over the knee boots and mini skirts were everywhere. All this prompted me to declare Minneapolis as the "Las Vegas Of The North".

Eventually we found the ramp, but the door we came out of was locked. We could not see another door nearby to use, so we simply walked up the off ramp cars used to exit the ramp. When we discovered the level we needed to be on was over a barricade, down about ten feet across a gulf leading down another story, we decided to jump over and down. All six of us safely by this obstacle, we walked by three ladies with impossibly long legs and found our car. 

Bright Lights- Twin Cities
Now Ben's car is a mid-90's era Toyota Camry. Not the largest of vehicles, mind you. The car is outfitted with front bucket seats and a rear bench seat. Four adults can shoehorn themselves into this vehicle and be "okay". Now we had two above that number.

I sat in front next to Ben who drove. Age does have its benefits! The other younger men crammed into the back, and I could see one of them was partially on anothers lap. Oh well! Off we went, and it wasn't long before the tired old Camry's springs left us to scrape bottom over the uneven parking garage pavement.

Once out on the road, we found smooth sailing. Ben was chuckling as he could see Tobie from North Central Cyclery snoozing behind me as he was wedged against the right rear door. The others were chatting away and Ben and I were navigating our way out of the downtown area successfully to deposit these fellows at their designated motel just off I-494. Then Ben and I, too tired to chat or do much of anything but drive, made our way back to Northfield under a bright, nearly full moon surrounded by stars and all that above a fresh coat of white on the rural scenery. It was beautiful, peaceful, and in direct contrast to what we had experienced over the last several hours.

Off to bed, then one more short day of Frostbike to go........

Frostbike 2013: Part 3

No- You can not buy one like this from Surly.
With Friday behind us, Ben and I woke up early and hit "The Tavern" in downtown Northfield for some eggs and bacon. Then it was on to "Goodbye Blue Mondays" for our cuppa joe to go, and off we went to QBP's massive warehouse for the Frostbike show.

When I got there I headed over to Salsa's booth and saw the prototype tandem 29"er, which was pretty awesome. Then after a bit of chatting with the Salsa folk, I moved onward to check out the other booths. It quickly became apparent that besides fat bike stuff, gravel road talk was high on several folks minds.

I spent a long time talking with Clement's Donn Kellogg. The gravel scene is really drawing manufacturers in, and I also learned from sources at the show that major players are taking notice. It will be interesting to see how the genre' is interpreted by more corporate entities. 

These new bags for the Big Dummy are super-rad.
I talked so much to so many folks on Saturday, in fact, that I missed lunch altogether. The afternoon wore on and it ended up with me hanging around the Salsa area with Ben and Curtis. A small crowd was gathering near by for SRAM's XX-1 giveaway. I noticed Hurl Everstone of One On One Studio and Cars Are Coffins fame talking with Greg Herbold, former downhill champ and current SRAM spokesperson. H-Ball was holding a koozie with a Keystone beer in it. He was telling a great story about a taxi ride with two foreign drivers in the same taxi. (You had to be there.)

Before long H-Ball was getting into "show mode" to give away the XX-1 group. Ben said he was going to run over to see who might win it, while Curtis and I stayed clear and chatted with some other folks.

Suddenly Ben was shouting Curtis' name and I realized Curtis won. Curtis' face was in disbelief as he walked over and received the voucher for a complete XX-1 group. A bit later, he almost traded it to Salsa's Kid Riemer for a Buick, but that didn't quite happen.

Then there was this shindig going on upstairs, but only for certain dealers. I was wearing my media tag. An old friend of mine that works at Q whisked me right in though, and the next thing ya know, I am up in the Salsa Cycles cubicle area quaffing beers and gabbing with the fellas. Here is where I started to figure out that I needed re-fueling. It had been since early morning that I had eaten, and I was getting kind of weird feeling in the head. No wonder! About this time, a bag of cheese curds appeared and saved me from utter collapse.

The deal was that there would be a dinner provided by QBP at 7pm and all I had to do was hang on a bit longer.

Nickle, (facing), and Ben on our way to the Cutter's Ball
Well, finally the word came that it was time, so we all filtered down to the cafeteria and grabbed a plate. Once we got through the line, we found that the room was filled and not many open seats were available. So we had a former QBP employee in the group who knew the building well. He directed us to a nearby conference room where we squatted and ate our meals without further adieu.

Once the grub had been grubbed, we made way to the show floor where there was karaoke and folks milling about. I somehow had gotten separated from Ben and Curtis during this time, so I wandered over to the shadow box displays where the QBP brands each display a bicycle or product. I stopped at the All City booth, where there was a Nature Boy or some model of theirs surrounded by Pabst Blue Ribbon cans. I noticed the pull tabs were still in the cans, but I figured the cans must have been drained. I casually kicked at one nearest to me and it was full! 

With one less can in the display, I walked down back to the crowd and found Ben and Curtis with a few others. We hung around a bit longer before Ben made the announcement that we were leaving for the Cutter's Ball. This is an event that has been taking place for the last four years. I'm not sure it is a benefit, but the event features some facet or entity in the Twin Cities bicycle culture, and this time it was all the way downtown.

Chad Ament, (L) and Tobie Depauw of NC Cyclery @ One On One
Well, this Cutter's Ball was all about Handsome Cycles moving in next door to One On One Bicycle Studio. So we had to ply the busy streets of downtown Minneapolis. Ben was driving, and while he has several amazing talents, being calm in the face of urban driving madness is not one of them. In a bit of frustration, he whipped the car into some random parking garage and parked the car. We had a passenger, Nickle, (yes- his real name), and we went in search of One On One Bicycle Studio.

We wandered in the general direction and eventually found the place after going about 8 blocks or so. Not bad, actually, and the "people watching" opportunities were vast and varied. The area is known for its clubs and younginz all dressed up were walking up and down the streets trying to search for that certain "sumpthin-sumpthin" that younginz often are in search of.

Once inside Ben and Curtis walked off with Nickle into the party. Me? I never got more than 20 feet inside the front door because there were so many folks that wanted to chat with me. Interesting conversations were had, and time was not on my mind. In fact, I have no clear idea what time it was during most of what I am writing about here. I was not at all worried about time. It was rather pleasant, actually.

Urban Adventurers
Well, we had to go home at some point, and once again, it was Ben who made the motion to head out. We picked up three more guys who needed rides back to their hotel. The crew, now six of us, took off in the general direction of the mystery parking garage that, by now, none of us had any clear idea about its specific location or the street it was on for sure. Ben proffered his ticket, taken upon our entrance, and GPS'ed the address and we were on a bead for the location until I misguided us about a block too far South.

Along our route, there were perhaps even more revelers than before when we came the other way. Dance club music filtered out of double doors guarded by twin security men up and down the streets. Lights flickered in the cold, somewhat foggy air. Girls with over the knee boots and mini skirts were everywhere. All this prompted me to declare Minneapolis as the "Las Vegas Of The North".

Eventually we found the ramp, but the door we came out of was locked. We could not see another door nearby to use, so we simply walked up the off ramp cars used to exit the ramp. When we discovered the level we needed to be on was over a barricade, down about ten feet across a gulf leading down another story, we decided to jump over and down. All six of us safely by this obstacle, we walked by three ladies with impossibly long legs and found our car. 

Bright Lights- Twin Cities
Now Ben's car is a mid-90's era Toyota Camry. Not the largest of vehicles, mind you. The car is outfitted with front bucket seats and a rear bench seat. Four adults can shoehorn themselves into this vehicle and be "okay". Now we had two above that number.

I sat in front next to Ben who drove. Age does have its benefits! The other younger men crammed into the back, and I could see one of them was partially on anothers lap. Oh well! Off we went, and it wasn't long before the tired old Camry's springs left us to scrape bottom over the uneven parking garage pavement.

Once out on the road, we found smooth sailing. Ben was chuckling as he could see Tobie from North Central Cyclery snoozing behind me as he was wedged against the right rear door. The others were chatting away and Ben and I were navigating our way out of the downtown area successfully to deposit these fellows at their designated motel just off I-494. Then Ben and I, too tired to chat or do much of anything but drive, made our way back to Northfield under a bright, nearly full moon surrounded by stars and all that above a fresh coat of white on the rural scenery. It was beautiful, peaceful, and in direct contrast to what we had experienced over the last several hours.

Off to bed, then one more short day of Frostbike to go........

Tuesday, February 26, 2013

Frostbike 2013: Part 2

Mike's Bikes: Home of Real and Fictional characters.
Now it is time to back up and tell the story on the Frostbike adventure from the beginning. Friday normally is kicked off with the Mike's bikes events. But this year it was different.

Mrs. Guitar Ted and I went up during the day Friday to try and get me up to the Salsa Cycles 2014 dealer presentation by 1pm. The issue here was that we had gotten a fresh dump of about 7 inches of snow overnight. I had to clear that away, then we waited on the roads to clear up a bit, as we watched the D.O.T. updates.

We got off to a bit of a late start, after we were assured by direct reports that the roads were good. (The D.O.T. site said they were packed in yet!) Wish we would have gotten the good word earlier, but oh well!

The trip up was uneventful, and due to our late start, I was going to miss the first 45 minutes or so of the 3 hour presentation. No big deal, until we got to the fringes of the Twin Cities' suburban sprawl.This would have been around the Lakeville area. That's when we came up on three lanes of 20mph traffic. It took awhile to figure it out, but then I saw it.

John and his "beaver skinning gloves". Don't ask...
 The reason why was that there was an echelon of snow plows from ditch to ditch ahead of us, and no one could get by. This was really going to mess with my timing!

I waited until we crossed the Minnesota River, then I got off and took city arterials to get to the area where the motel was that had the Salsa presentation. I was really, really late now!

Funny thing was that almost immediately after getting inside I ran across Ben, I got updated, and got in to peer at some really cool machinery. Obviously, I didn't have long to stick around and when it was over, Curtis, Ben, myself, and a few others hit the motel bar. Initially the plan was to go to a Korean restaurant with Ben's wife and Mrs Guitar Ted later, but Ben's wife was a bit under the weather, so we determined that we were on our own. 

Ben coming in hot at the repair area
After a while we determined that we should head back to Northfield and get to Mike's Bikes. We picked up some "adult beverages", set course for Mike's, and got there a bit later than usual, but in fine shape.

There was the usual Greek pizza, beer, and riding shenanigans. I got to talk to Mike for a bit, which is always a highlight of the trip for me. Good stories about the early Marin scene at the birth time of mountain biking as we know it.

But while all that was good, it was all tempered by abit less excitement and a bit less craziness than previous years. Still- it was a good time. We stayed up fairly late, but this may have been the earliest end to a Mike's Bikes party yet. Ben and I headed back to his place, got settled, and hit the hay to rest before a big, long day of Frostbike.

So that was the day of Friday. Stay tuned for Saturday's saga and the rest of the Frostbike story coming tomorrow. 

Frostbike 2013: Part 2

Mike's Bikes: Home of Real and Fictional characters.
Now it is time to back up and tell the story on the Frostbike adventure from the beginning. Friday normally is kicked off with the Mike's bikes events. But this year it was different.

Mrs. Guitar Ted and I went up during the day Friday to try and get me up to the Salsa Cycles 2014 dealer presentation by 1pm. The issue here was that we had gotten a fresh dump of about 7 inches of snow overnight. I had to clear that away, then we waited on the roads to clear up a bit, as we watched the D.O.T. updates.

We got off to a bit of a late start, after we were assured by direct reports that the roads were good. (The D.O.T. site said they were packed in yet!) Wish we would have gotten the good word earlier, but oh well!

The trip up was uneventful, and due to our late start, I was going to miss the first 45 minutes or so of the 3 hour presentation. No big deal, until we got to the fringes of the Twin Cities' suburban sprawl.This would have been around the Lakeville area. That's when we came up on three lanes of 20mph traffic. It took awhile to figure it out, but then I saw it.

John and his "beaver skinning gloves". Don't ask...
 The reason why was that there was an echelon of snow plows from ditch to ditch ahead of us, and no one could get by. This was really going to mess with my timing!

I waited until we crossed the Minnesota River, then I got off and took city arterials to get to the area where the motel was that had the Salsa presentation. I was really, really late now!

Funny thing was that almost immediately after getting inside I ran across Ben, I got updated, and got in to peer at some really cool machinery. Obviously, I didn't have long to stick around and when it was over, Curtis, Ben, myself, and a few others hit the motel bar. Initially the plan was to go to a Korean restaurant with Ben's wife and Mrs Guitar Ted later, but Ben's wife was a bit under the weather, so we determined that we were on our own. 

Ben coming in hot at the repair area
After a while we determined that we should head back to Northfield and get to Mike's Bikes. We picked up some "adult beverages", set course for Mike's, and got there a bit later than usual, but in fine shape.

There was the usual Greek pizza, beer, and riding shenanigans. I got to talk to Mike for a bit, which is always a highlight of the trip for me. Good stories about the early Marin scene at the birth time of mountain biking as we know it.

But while all that was good, it was all tempered by abit less excitement and a bit less craziness than previous years. Still- it was a good time. We stayed up fairly late, but this may have been the earliest end to a Mike's Bikes party yet. Ben and I headed back to his place, got settled, and hit the hay to rest before a big, long day of Frostbike.

So that was the day of Friday. Stay tuned for Saturday's saga and the rest of the Frostbike story coming tomorrow. 

Monday, February 25, 2013

Frostbike 2013 Part 1: Carbon Fat Bike Dream Come True?

Carbon Beargrease: Image courtesy of Salsa Cycles
Frostbike 2013:

Everyone has probably heard by now, but the show was all about the carbon fiber fat bike, Salsa Cycles 2014 Carbon Beargrease.

The shop where I work is a Salsa Cycles dealer. So, I got to pre-view some of the 2014 line up. I signed a "NDA", so you are not going to hear me say, or read anything about most of what I know, but they did say we could run with one thing they showed, and honestly, it is one of the coolest things they are doing for 2014 anyway, so here ya go......

I saw this pre-production rig up close. I will say that there are things going on with the frame, fork, wheels, and drive train that no one is doing now in fat bikes. These are things that make the idea of a fat bike better. Much better. Never mind that it is a carbon frame and fork. And what a frame and fork!

Cartoonish frame tubes here. Huge, huge fork crown, legs that slant inward  toward the through axle front end. Tapered steer tube, inset head set, and the look is sleek, and every bit as top shelf looking as any high end road bike carbon fiber you can name. Check out that downtube/bottom bracket junction! Whoa! A through axle rear? Are you kidding me? 

Image courtesy of Salsa Cycles
 Internally routed cables here, and note the fit of the fork to the head tube. This is a pre-production rig, so I was pretty impressed by this. The graphics aren't right, and there will be a bit of color, as I understand it, here and there. Still, the bike is stunning, both in appearance, and in technological level.

The weight? I've heard 24lbs for the XX-1 spec level. Oh yeah.......there will be an XX-1 spec'ed crank set, cassette, rear derailleur, and chain. The whole XX-1 deal on a fat bike. Awesome.

So, here's the thing: The bike does do a lot of things that I would have hoped a carbon fat bike would do. One is the shapes carbon can be used for were applied here. That aforementioned fork? Yeah- the crown flows out and around the top of the tire for maximum clearance, and that slants back to the axle, as I stated. The down tube is spread out to provide a shape that looks to me to be something that should resist twisting and prevent a lot of torsional twist in the chassis.

And of course, there is the weight. Wow. 24lbs for the pre-production bike, that has tubed tires, and no trickery besides the cool XX-1 drive train. You thought fat bikes were too heavy? Not anymore. This is a year round choice for mountain biking now, with the only caveat that tire prices are pretty dang prohibitive, so if you ride a lot, you may need to cut back on the beer budget a bit to save up for new skins eventually. I don't think you'll mind, if this is as fun of a bike as I imagine it must be.

So, there was that! There will be far more to say about this in the future. Of course, there was a lot more to Frostbike- both at the show and outside of it. Look for all of that later. Tomorrow and throughout the week.

Frostbike 2013 Part 1: Carbon Fat Bike Dream Come True?

Carbon Beargrease: Image courtesy of Salsa Cycles
Frostbike 2013:

Everyone has probably heard by now, but the show was all about the carbon fiber fat bike, Salsa Cycles 2014 Carbon Beargrease.

The shop where I work is a Salsa Cycles dealer. So, I got to pre-view some of the 2014 line up. I signed a "NDA", so you are not going to hear me say, or read anything about most of what I know, but they did say we could run with one thing they showed, and honestly, it is one of the coolest things they are doing for 2014 anyway, so here ya go......

I saw this pre-production rig up close. I will say that there are things going on with the frame, fork, wheels, and drive train that no one is doing now in fat bikes. These are things that make the idea of a fat bike better. Much better. Never mind that it is a carbon frame and fork. And what a frame and fork!

Cartoonish frame tubes here. Huge, huge fork crown, legs that slant inward  toward the through axle front end. Tapered steer tube, inset head set, and the look is sleek, and every bit as top shelf looking as any high end road bike carbon fiber you can name. Check out that downtube/bottom bracket junction! Whoa! A through axle rear? Are you kidding me? 

Image courtesy of Salsa Cycles
 Internally routed cables here, and note the fit of the fork to the head tube. This is a pre-production rig, so I was pretty impressed by this. The graphics aren't right, and there will be a bit of color, as I understand it, here and there. Still, the bike is stunning, both in appearance, and in technological level.

The weight? I've heard 24lbs for the XX-1 spec level. Oh yeah.......there will be an XX-1 spec'ed crank set, cassette, rear derailleur, and chain. The whole XX-1 deal on a fat bike. Awesome.

So, here's the thing: The bike does do a lot of things that I would have hoped a carbon fat bike would do. One is the shapes carbon can be used for were applied here. That aforementioned fork? Yeah- the crown flows out and around the top of the tire for maximum clearance, and that slants back to the axle, as I stated. The down tube is spread out to provide a shape that looks to me to be something that should resist twisting and prevent a lot of torsional twist in the chassis.

And of course, there is the weight. Wow. 24lbs for the pre-production bike, that has tubed tires, and no trickery besides the cool XX-1 drive train. You thought fat bikes were too heavy? Not anymore. This is a year round choice for mountain biking now, with the only caveat that tire prices are pretty dang prohibitive, so if you ride a lot, you may need to cut back on the beer budget a bit to save up for new skins eventually. I don't think you'll mind, if this is as fun of a bike as I imagine it must be.

So, there was that! There will be far more to say about this in the future. Of course, there was a lot more to Frostbike- both at the show and outside of it. Look for all of that later. Tomorrow and throughout the week.

Saturday, February 23, 2013

Trans Iowa V9: Thoughts On The Pre-Race Meat-Up #2

Prize for the Men's Open Winner
Okay, listen up folks because this post is going to be packed with information for both racers and support/family/friends that come along to Trans Iowa V9. Ready? Here we go.....

First off, all participants in T.I.V9 are required to show up for the Pre-Race Meat-Up which will be held, once again, at the Grinnell Steakhouse. As I did last year, I am going to do again for this year. So, if you are already registered for T.I.V9, and you show up,  here is the plan:

Show up as soon as possible after 4:00pm to get grillin' yer meal. I want to have the meal portion of this done by 6:30pm, or shortly after. Also- During this time you should check in with Guitar Ted, (me!), and I will tick your name off the roster. This is very important, because if you are not checked in with me by 6:30pm, Friday April 26th at the Grinnell Steakhouse, you will not be racing! We will also be having you sign waivers, sign media releases, and you will get your number plate and something to attach it with.

Next- Around 7:00pm-ish, (or before if things are moving right along), everyone should be inside the main room set aside for us and we'll have a short acknowledgement of sponsors, volunteers, and then the Pre-Race meeting proper. Here I will go over any fine details on the course, the start, checkpoint #1, timing, the finish line, and answer any questions you may have. Finally, if there are any course re-routes or issues to tell you about, these will be delineated and explained at the Meat-Up.The last thing that will happen is racer call up. (Remember the check in? This is important, because if you do not check in, I won't call you up to get your cue sheets.) Anyone that checked in will get called up and receive a bag containing any sponsored nutritional/prizing things I may get, and most important of all- your first set of cue sheets.

Hopefully that will be all finished before 8:00pm, and maybe even by 7:30pm, so everyone can get out of there and catch whatever sleep they can before the 4am start in front of Bikes To You in downtown Grinnell.

NOTE: I will be sending e-mails to everyone on the roster asking for your selection for the Pre-Race meal. There will be 4 options, as before, and you will be grilling your meat or veggie kabob on a huge open grill inside the Steakhouse. The e-mails should go out sometime in March. Keep an eye on your in-boxes!

Prize for the Women's Open Winner
The Barn: 

Okay- here are some details on "The Barn", which is an old, restored 19th Century barn located on Jacob Avenue approximately 3 miles West of Grinnell. This has been graciously offered to Trans Iowa to use not only as our very unique finish line, but as a base of sorts for support folks, friends, spouses, or interested parties to hang out during Trans Iowa V9. Saturday morning, after the event has started and the sun is up, there will be a free gravel group ride for anyone that is hanging out. Expect to ride at least 75-80 miles. The route will use much of the opening miles of T.I.V9. Saturday evening, around 5pm, the Barn will open. There will be a taco truck there supplied by Tacopocalypse. There will be room for folks to set up tents and camp* near the barn, there will be fun and media entertainment in the form of updates live from Trans Iowa's course, a showing or two of "300 Miles of Gravel", and other things we are working on.

Since the Barn is remote, and up a 1/4 mile of dirt road, with zero parking designated by it, we are going to ask folks to park about a 1/2 mile away at the Jacob Krum Preserve, which has a large, spacious gravel lot. It's a nice walk, mostly down hill, to the Barn. Hopefully the weather will be decent! But once inside, you'll find things well set up, dry, well lit, and warm.

This will be open then until the last rider comes in, or until 2pm Sunday afternoon, whichever happens first. Riders will be coming in, right up the last bit of dirt road, to finish right at The Barn, so you won't want to miss that in case you have folks in the race yet, or if you have had to drop out and want to see who finished.

Okay, more details as I get things squared away, but that's the gist of what to expect at the three days that entail Trans Iowa.
*Note: As far as camping is concerned, realize that it will be primitive. There is no running water, toilet, or electricity available on site. The Jacob Krum Preserve up the road will have a toilet and maybe water. Come prepared if you are going to stay out there! You should also hit me with an e-mail if this is your plan so I can account for everyone and send a head count ahead to the Barn folk. 

Trans Iowa V9: Thoughts On The Pre-Race Meat-Up #2

Prize for the Men's Open Winner
Okay, listen up folks because this post is going to be packed with information for both racers and support/family/friends that come along to Trans Iowa V9. Ready? Here we go.....

First off, all participants in T.I.V9 are required to show up for the Pre-Race Meat-Up which will be held, once again, at the Grinnell Steakhouse. As I did last year, I am going to do again for this year. So, if you are already registered for T.I.V9, and you show up,  here is the plan:

Show up as soon as possible after 4:00pm to get grillin' yer meal. I want to have the meal portion of this done by 6:30pm, or shortly after. Also- During this time you should check in with Guitar Ted, (me!), and I will tick your name off the roster. This is very important, because if you are not checked in with me by 6:30pm, Friday April 26th at the Grinnell Steakhouse, you will not be racing! We will also be having you sign waivers, sign media releases, and you will get your number plate and something to attach it with.

Next- Around 7:00pm-ish, (or before if things are moving right along), everyone should be inside the main room set aside for us and we'll have a short acknowledgement of sponsors, volunteers, and then the Pre-Race meeting proper. Here I will go over any fine details on the course, the start, checkpoint #1, timing, the finish line, and answer any questions you may have. Finally, if there are any course re-routes or issues to tell you about, these will be delineated and explained at the Meat-Up.The last thing that will happen is racer call up. (Remember the check in? This is important, because if you do not check in, I won't call you up to get your cue sheets.) Anyone that checked in will get called up and receive a bag containing any sponsored nutritional/prizing things I may get, and most important of all- your first set of cue sheets.

Hopefully that will be all finished before 8:00pm, and maybe even by 7:30pm, so everyone can get out of there and catch whatever sleep they can before the 4am start in front of Bikes To You in downtown Grinnell.

NOTE: I will be sending e-mails to everyone on the roster asking for your selection for the Pre-Race meal. There will be 4 options, as before, and you will be grilling your meat or veggie kabob on a huge open grill inside the Steakhouse. The e-mails should go out sometime in March. Keep an eye on your in-boxes!

Prize for the Women's Open Winner
The Barn: 

Okay- here are some details on "The Barn", which is an old, restored 19th Century barn located on Jacob Avenue approximately 3 miles West of Grinnell. This has been graciously offered to Trans Iowa to use not only as our very unique finish line, but as a base of sorts for support folks, friends, spouses, or interested parties to hang out during Trans Iowa V9. Saturday morning, after the event has started and the sun is up, there will be a free gravel group ride for anyone that is hanging out. Expect to ride at least 75-80 miles. The route will use much of the opening miles of T.I.V9. Saturday evening, around 5pm, the Barn will open. There will be a taco truck there supplied by Tacopocalypse. There will be room for folks to set up tents and camp* near the barn, there will be fun and media entertainment in the form of updates live from Trans Iowa's course, a showing or two of "300 Miles of Gravel", and other things we are working on.

Since the Barn is remote, and up a 1/4 mile of dirt road, with zero parking designated by it, we are going to ask folks to park about a 1/2 mile away at the Jacob Krum Preserve, which has a large, spacious gravel lot. It's a nice walk, mostly down hill, to the Barn. Hopefully the weather will be decent! But once inside, you'll find things well set up, dry, well lit, and warm.

This will be open then until the last rider comes in, or until 2pm Sunday afternoon, whichever happens first. Riders will be coming in, right up the last bit of dirt road, to finish right at The Barn, so you won't want to miss that in case you have folks in the race yet, or if you have had to drop out and want to see who finished.

Okay, more details as I get things squared away, but that's the gist of what to expect at the three days that entail Trans Iowa.
*Note: As far as camping is concerned, realize that it will be primitive. There is no running water, toilet, or electricity available on site. The Jacob Krum Preserve up the road will have a toilet and maybe water. Come prepared if you are going to stay out there! You should also hit me with an e-mail if this is your plan so I can account for everyone and send a head count ahead to the Barn folk. 

Friday, February 22, 2013

Friday News And Views

Cielo's new "Overlander"
NAHBS: 

This weekend marks the NAHBS opening in Denver, Colorado. Likely some fancy-pants, outlandishly priced rig will win the "Best of Show" award, and similar rigs will take home the other traditional prizes at NAHBS, but this Cielo offering would be my pick.

Dubbed the "Overlander", you could easily say this is a high-brow steel Fargo of the Gen I variety. Cielo says" Informed by our love of gravel adventures, back country exploration, bike packing, long road tours, and urban commuting, the Overlander is constructed with the same attention to detail and elegance that is the hallmark of every Chris King product."

It isn't suspension corrected, and the fork was specially constructed for this bike. It accepts mini-top racks, low rider mounts, and even has water bottle braze ons- one on the outside of each fork leg. The bike accepts rear racks, fenders, and has a full compliment of water bottle braze ons as well. 

I like the color combo here!
Finally, Cielo also installed a swinger drop out for single speed and IGH compatibility. See that Salsa Cycles? The Fargo sorely needs this added! 

While Cielo shows it here with Jones bars and some flat bar or another, I would drop bar this bike and if it handled as well or better than my Gen I Fargo? Well, I'd probably let that old Fargo go because the one thing that bike misses is the versatility of a swinging drop out.

And I gotta say, that reddish-orange hue is killer! Love the white tire look too, but in practice, white tires don't tend to be the best quality tires for what I'd be doing.

Anyway, all that to show that adventure/gravel bikes are definitely a theme for NAHBS this year. Glad to see that too. Now- I wonder if Cielo is going to send one of these down Tour Divide? Might be a good marketing move there.

Ardennes Plus
Also getting introduced at NAHBS will be the HED Wheels Ardennes Plus that I reviewed recently here and here on Gravel Grinder News. The wheels will be getting a new set of tires soon, and then I will be doing a longer term update on them at some point this summer.

It will be interesting to see and read about the details on these wheels from other cycling media and fans at NAHBS. I think they are an interesting product and a different take on what gravel grinding wheels should be. But you never know- maybe I have that all wrong, and the fall out from the "official launch" will tell me one way or the other.

Frostbike:

While NAHBS might be fun, and it is located closer to me than ever this year, I can't go when Frostbike is going on. This is the dealer only show by bicycle parts supplier giant, Quality Bicycle Products, located in Bloomington, Minnesota. But first-

I  have an appointment to see Salsa Cycles, in regards to the shop  where I work being a dealer, (that I won't be talking about here or anywhere for awhile, I suppose), and then its on to the "annual" shindig at Mike's Bikes in Northfield, Minnesota. It should be a scene. Usually there are three things. Okay.....four! Good friends, beer, Greek pizza, and indoor bicycle riding shenanigans.  It's more fun than a grown man should be allowed to have, however you slice it, and I look forward to it every year.

Alrighty then. I have a canned Trans Iowa post for tomorrow loaded with info, so look for that. Otherwise, get outside, have some fun, and we'll see ya soon!

Friday News And Views

Cielo's new "Overlander"
NAHBS: 

This weekend marks the NAHBS opening in Denver, Colorado. Likely some fancy-pants, outlandishly priced rig will win the "Best of Show" award, and similar rigs will take home the other traditional prizes at NAHBS, but this Cielo offering would be my pick.

Dubbed the "Overlander", you could easily say this is a high-brow steel Fargo of the Gen I variety. Cielo says" Informed by our love of gravel adventures, back country exploration, bike packing, long road tours, and urban commuting, the Overlander is constructed with the same attention to detail and elegance that is the hallmark of every Chris King product."

It isn't suspension corrected, and the fork was specially constructed for this bike. It accepts mini-top racks, low rider mounts, and even has water bottle braze ons- one on the outside of each fork leg. The bike accepts rear racks, fenders, and has a full compliment of water bottle braze ons as well. 

I like the color combo here!
Finally, Cielo also installed a swinger drop out for single speed and IGH compatibility. See that Salsa Cycles? The Fargo sorely needs this added! 

While Cielo shows it here with Jones bars and some flat bar or another, I would drop bar this bike and if it handled as well or better than my Gen I Fargo? Well, I'd probably let that old Fargo go because the one thing that bike misses is the versatility of a swinging drop out.

And I gotta say, that reddish-orange hue is killer! Love the white tire look too, but in practice, white tires don't tend to be the best quality tires for what I'd be doing.

Anyway, all that to show that adventure/gravel bikes are definitely a theme for NAHBS this year. Glad to see that too. Now- I wonder if Cielo is going to send one of these down Tour Divide? Might be a good marketing move there.

Ardennes Plus
Also getting introduced at NAHBS will be the HED Wheels Ardennes Plus that I reviewed recently here and here on Gravel Grinder News. The wheels will be getting a new set of tires soon, and then I will be doing a longer term update on them at some point this summer.

It will be interesting to see and read about the details on these wheels from other cycling media and fans at NAHBS. I think they are an interesting product and a different take on what gravel grinding wheels should be. But you never know- maybe I have that all wrong, and the fall out from the "official launch" will tell me one way or the other.

Frostbike:

While NAHBS might be fun, and it is located closer to me than ever this year, I can't go when Frostbike is going on. This is the dealer only show by bicycle parts supplier giant, Quality Bicycle Products, located in Bloomington, Minnesota. But first-

I  have an appointment to see Salsa Cycles, in regards to the shop  where I work being a dealer, (that I won't be talking about here or anywhere for awhile, I suppose), and then its on to the "annual" shindig at Mike's Bikes in Northfield, Minnesota. It should be a scene. Usually there are three things. Okay.....four! Good friends, beer, Greek pizza, and indoor bicycle riding shenanigans.  It's more fun than a grown man should be allowed to have, however you slice it, and I look forward to it every year.

Alrighty then. I have a canned Trans Iowa post for tomorrow loaded with info, so look for that. Otherwise, get outside, have some fun, and we'll see ya soon!

Thursday, February 21, 2013

A Rejoinder To The Ponderer

Recently a dust up of sorts has blown up over a post done by Bike Hugger's main protagonist, Byron DL, who had this bit published on "Wired" recently.  (I recommend you read it to help make the rest of my post make sense.)

In the article Byron "ponders the point" of "snow bikes", (a term which is rife with misunderstandings right up front), and goes on.....well, go read it by clicking the link above!

Byron happens to also be on Facebook, and messaged me for my response to the article, knowing I was a fan of this sort of vehicle. I have decided to take the liberty of posting my entire response, verbatim, which I present here today. A couple of things to note...

  • Once again-  read the article linked above, or you won't understand the rest here. 
  • "You" in my response refers to Byron DL, the author of the "Wired" article linked here. 
  • Byron may or may not post some of the following in a follow up he mentioned he may do to me. (I gave him my blessing to do so.) This is one of the reasons I decided to go ahead and post this message from Facebook here, and besides, I stand behind everything stated here.
Without further adieu.....

"My take? Well, you raise some points that found me nodding my head in agreement, but you also seem to have some feelings that I find contrary to the experience of riding in conditions that are otherwise unrideable with "ordinary mountain bikes".

You seem annoyed by the slow, mind numbing pace of the riding, the high focus on handling, and some technicalities with components. I ask you- would you rather be riding rollers/trainers? For many, that is the only other option at times.

I also find that the high focus on handling actually pays dividends when I do get back on my "typical mtb" in the regular season. In this sense, I get a benefit, albeit not an immediate one. The bikes are heavier- this makes me stronger when I ride my other bikes. The bikes have technical challenges now- but as you point out, with refinement, you will see those overcome. (By the way, Grip Shift is the bomb on a fat bike with thicker gloves. )

The slower paced riding is actually peaceful, and not unlike what one might experience while hiking- only you are riding a bicycle. I am not holden to the belief that speed "has to be" a part of an enjoyable cycling experience, but many are. I get that, but I don't think everyone is this way.

Furthermore, I have witnessed first hand how many first time off roaders are tickled to death to find such a stable beast, which a fat bike is, which slows down the need to react to inputs, and is giving them traction for days in corners and on climbs. In this sense, it opens the off road doors to folks who are otherwise terrified of many of the mountain bikes you specifically call out in your piece. The "ATV" of mtb vs the "Honda 250 motocrosser", if you will.

That said- yes- they could be better, and I think companies like On One, who developed their fat bike with trail riding in mind, are on the right track. It also is interesting to note that J&B Importers, who have the house brand, "Origin 8" are coming out with a fat bike exactly as you have envisioned, (albeit heavy), by the way of the introduction of the Nuvinci 360 hubbed "Crawler", available in April.

I feel a front suspended, 3"-3.8" tired, fat bike with trail geometry would be the best representation of a bike that would bring a different flavor to mountain biking. I feel there is potential there. (Check out the Belgian brand, Sandman, for where I think this is going)

Anyway, I think there is much potential for a larger audience for these bikes, that isn't the "typical" 5 inch travel mtb freak of today."


As a follow up to the above, it should be noted as well that there is more to riding these fat tired bikes than snow. I know- most of you folks landing here "get that", but it needs to be drilled again to underscore the point. 

Are fat bikes better or worse than mountain bikes? Well, first off, they are mountain bikes. Secondly, while they are not the best for going really fast, dropping in a 12 footer, or for climbing as fast as you can go, they will cover much of the same territory as most mountain bikes, just differently. 

It is that "difference" which likely appeals to those fans of fat bikes who are willing to accept the short term limitations to the genre for the immediate benefits of this type of rig. Can they be better? Sure they can. I suspect "fat bikes" will become something a lot different than we know them as now, much like  a 1980's era "mountain bike" is not very similar to the modern incarnations of the genre today.  

As if on cue in terms of the above statement, SRAM officially announced their fat bike crank offerings yesterday. I see that as just the tip of the iceberg, as it were, in fat bike refinements. Time will tell, but I don't think the "Wired" piece is as negative as many seem to think it is. A bit misguided or misinformed? Maybe that, but certainly there are some points there that make sense, and given what I think will happen, in the end, it won't be a big deal at all.